Bend Deductions
Interactive bend deductions can be manually entered or imported using Bend Deductions.
| No | Description | Meaning |
|---|---|---|
1 |
Material |
Shows the material for which the bend deductions apply. |
2 |
Thickness |
Shows the thickness of the sheet for which the bend deductions apply. |
3 |
Punch radius |
Shows the upper tool radius for which the bend deductions apply. |
4 |
The V-width |
Shows the lower tool width for which the bend deductions apply. |
5 |
The radius |
Shows the lower tool radius for which the bend deductions apply. |
6 |
The angle |
Shows the lower tool angle for which the bend deductions apply. |
7 |
Bend angle |
Shows the bending angle for which the bend deductions apply. |
8 |
Deduction (edge) |
Shows the bend deduction at less than or equal to 90°. |
9 |
Deduction (tangent) |
Shows the bend deduction at greater than 90°. |
10 |
Inner radius |
Shows the inner radius for which the bend deductions apply. |
11 |
Add |
Bend deductions |
12 |
Delete |
Deletes the selected bend deductions. |
13 |
Graph.. |
Displays the graph]" screen. |
14 |
Reset |
Resets the bend deductions. |
15 |
Import.. |
Bend deductions can be imported here using a CSV file. |
16 |
Export |
Bend deductions can be exported here using a CSV fileThis does not work with Trumpf bend deductions. |
-
Material: The material is selected here.
-
Thickness: The material thickness is set here.
-
Punch radius: The upper tool radius is set here.
-
Die V-width: The lower tool width is set here.
-
Die radius (optional): A lower tool radius can be set here optionally.
-
Die angle (optional): A lower tool angle can be set here optionally.
-
Bend angle: The bending angle is set here.
-
Deduction (edge): The bend deduction for angles smaller than or equal to 90° is set here.
-
Deduction (tangent): This bend deduction for angles greater than 90° is set here.
-
Inner radius: The inner radius is set here.
